Analisis Teknologi Charger Untuk Kendaraan Listrik - Review
Keywords:Charger, EVSE, AC level 1, AC level 2, DC Fast Charging
Electric vehicles are a choice for the future. Therefore, the electric vehicle will be spreads in the community. The public is the average consumer who does not have knowledge about electric vehicles, especially for problem charger. Charger technology in an Electric Vehicle Supply Equipment (EVSE) consists of three types, namely AC level 1, AC level 2 and DC fast charging. Each type has advantages and disadvantages. The disadvantage of AC level 1 type is take a long time for charging (about 20 hours) and the advantage is no risk of damaging the battery. AC level 2 has shortcomings that are still relatively long time to process the charge but shorter process than the AC charge level 1 and there is no high risk of damaging to the battery. DC fast charging has excesscharge process is very short (express)at range 20-30 minutes, but the disatvantage is very high risk of damaging the batteries in continuous usage.This paper also provide discussion for placement of any type of charger, so that people will understand.
Doug Kettles, Februari2015, Electric Vehicle Charging Technology Analysis And Standards, Florida Solar Energy Center, AmerikaSerikat.
The Massachusetts Department of Energy Recources, Juni 2014, Installation Guide For Electric Vehicle Supply Equipment (EVSE),The Massachusetts Department of Energy Recources, AmerikaSerikat
Amtex Electronics, Februari 2012, Battery Charging Terminology, Amtex Electronics PTY LTD, Australia.
Charles Botsford, Mei 2009, Fast Charging vs. Slow Charging: Pros and cons for the New Age of Electric Vehicles, AeroVironmentInc, Norwegia.
U.S. Department of Energy, April 2012, Plug-In Electric Vehicle Handbook, U.S. Department of Energy, AmerikaSerikat.
This work is licensed under aÂ Creative Commons Attribution-NonCommercial 4.0 International License.