Pengaruh Fraksi Volume Serat Kayu Gelam (Melaleuce Leucandendra) terhadap Kekuatan Tarik dan Impak Komposit Bermatrik Polyester

Authors

  • Saifullah Arief
  • Pratikto Pratikto Brawijaya University
  • Yudy Surya Irawan Brawijaya University

DOI:

https://doi.org/10.21776/ub.jrm.2016.007.03.3

Keywords:

Gelam Bark Fiber, Polyester Composite, Alkalization Treatment

Abstract

The purpose of this research is to find the effect of volume fraction variation of “gelam†bark fiber on tensile and impact strength of polyester composite. The filler material was the “gelam†bark fiber with volume variation ratio of 10%, 30 %, 50 % and 70 %. Alkalization of the “gelam†bark fiber used 5% of NaOH and 2 hours of soaking time. Mechanical testing was carried out by tensile and impact testing. The matrix for bonding the “gelam†bark fiber was polyester resin type 157 BTQN and 1% concentration of MEKPO catalyst. The mechanical properties are obtained from tensile and impact testing: The results of tensile testing; slowed the highest tensile strength of compositre with 70% of ‘gelam bark fiber was 15.623 MPa. The results of impact testing: obtained the highest impact strength in composete with 70 % percentage of ‘gelam’ bark fiber is24.772 J.

References

Irma, Iswandi, (2009) Pengaruh Proses Vakum Dan Variasi Tekanannya Terhadap Sifat Tarik Komposit Serat Alam (Coir Fibre Reainforced Resin Composit ). Tugas akhir, Jurusan Teknik Mesin, Fakultas Teknik Mesin (SNTTM) ke-9 Palembang

Irma (2009) Jacob, (1994) Metal Matrik Composites (MMCs), Poliymer Matrik Compsites (PMCs) dan Ceramics Matrix Composites (CMCs)

ASTM. D 638. Standart test method for tensile properties of plastics. Philadelphia, PA American Society for Testing and Materials.

ASTM. D 5942 Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating material. Philadelphia, PA : American Society for Testing and Materials.

Gibson, (1994) Micromechanical Modeling of Damping in Discontinuous Fiber Composites Using a Strain Energy/Finite Element Approach

Hairul Abral, (2010) Studi Tarik dan sifat fisik Cyathea Contaminans sebelum dan setelah perlakuan alkali NaOH, Teknik, No 33 Vol 1 Tahun XVII, April 2010

Irma, Iswandi, (2009) Pengaruh Proses Vakum Dan Variasi Tekanannya Terhadap Sifat Tarik Komposit Serat Alam (Coir Fibre Reainforced Resin Composit ). Tugas akhir, Jurusan

Teknik Mesin, Fakultas Teknik Mesin (SNTTM) ke-9 Palembang

Kulit Kayu Gelam (2011) Http:adkirey.blogspot.com/2011/04/kayu-gelam.html diakses tanggal 17 jan 2011

Kuncoro, (2009) Bagaimana meningkatkan ikatan ( Mechanical bilding ) antara serat dan Matrik (perekat)

Jufra Daud Johanis Abanat, Yudy Surya Irawan, Anindito purnowidodo (2013) pengaruh fraksi volume serat pelepah gebang (coryphe utan Lamarck) terhadap sifat mekanik pada komposit bermatrik epoksi, Jurnal Rekayasa Mesin Vol.3 no 2 Tahun 2012 :352-361

Aladin Eko Purkuncoro, (2012), Pengaruh Sudut Anyam Serat Ijuk ( Arenga Pinata ) Terhadap Kekuatan Impek dan Tarik Komposit Matrik Polyester, Tesis

Yudy Surya Irawan, (2010), R. Adhi Kristia Ramaputera, Winarmo Yahdi Atmojo, Meningkatkan Kekuatan Tarik Komposit Matriks Polypropylin dengan Veriasi Fraksi Volume dan Perlakuan Alkali pada Serat Serabut Kelapa, Proceding,Teknik Mesin, Fakultas Teknologi Industri, Universitas Kristen Petra, Surabaya, 25 Agustus 2011 ( ISBN: 979-978-25-4414-5 ).

Triyono , Diharjo, (2000) Komposit Epoksi Berpenguat Serat Jute Welding Journal Smith,W.F (1996) Priciples of materials Sciens and Engineering , 2nd ed, Mc Graw – zhil Singapure

Ludi Hartanto, (2009) Study Perlakuan ALKALI dan Fraksi Volume Serat Terhadap Kekuatan Bending, Tarik, dan Impek Komposit Berpenguat Serat Rami Bermatrik Polyester BQTN157

Melaleuca Leucadendra htt://en.wikipedia.org/wiki/Melaleuce_leucadendra diakses tanggal 31 May 2011

Downloads

Published

2017-03-23

Issue

Section

Articles