JARAK ROTOR YANG OPTIMAL TERHADAP RIPPLE PLATE PADA MESIN RIPPLE MILL UNTUK EFISIENSI HASIL PEMECAH BIJI KELAPA SAWIT CB MODIPALM KAPASITAS 8 TON/JAM

Authors

  • Agus Harianto Universitas Antakusuma
  • Aspiyansyah Aspiyansyah Universitas Antakusuma
  • Ecy Yedija Faot Universitas Antakusuma

DOI:

https://doi.org/10.21776/jrm.v15i1.1840

Keywords:

Ripple Mill, Rotor, Ripple Plate, Nut and Kernel, Machine Performance Efficiency

Abstract

A ripple mill machine is one of the crucial pieces of equipment in the palm oil processing industry to separate oil palm kernels into fruit kernels and shells. One of the key components in this machine is the rotor and ripple plate, which play a role in the process of breaking seeds. This study aims to determine the optimal distance between the rotor and ripple plate on the ripple mill machine. The test was conducted using a CB Modipalm-type ripple mill machine. The parameter observed was the cracking efficiency of oil palm kernels, which was measured based on the percentage of cracked seeds, whole seeds, and crushed kernels. The results showed that the optimal distance between the rotor and ripple plate was 5 mm, with an efficiency value of 96.62%. 

References

Mohd Pauzi F, Muda K, Basri HF, Omoregie AI, Hong CY, Aftar Ali NS, et al. A mini review and bibliometric analysis of palm oil mill effluent in past five years. In: IOP Conference Series: Earth and Environmental Science. 2023.

Jayarullah, Rita Hartati. Riplle Mill Machine Failure Analysis Using the Failure Mode and Effect Analysis (FMEA) Method at PT. Ujong Neubok In. J Inotera. 2023;8(1).

Hong WO. Review on Carbon Footprint of the Palm Oil Industry: Insights into Recent Developments. Int J Sustain Dev Plan. 2023;18(2).

Romero-Lopez A, Ramos F, Ochoa CY, Mataran A, Olmo RM, Lopez JCFM, et al. Market Research About Agriso Mobile Application For Farmers. Sustainability. 2020;12(1).

Olosunde WA, Assian UE, Antia OO. Determination of Rotor Operating Factor (Efficiency) Required for the Design of Rotor Speed in a Centrifugal Nut Cracker. Am J Innov Sci Eng. 2023;2(2).

Abubakar I, Ibrahim M, Ahmed K, Oji N, Adigun HA. Determination of Optimal Impeller Parameters for Improved Ginger Slicing Efficiency. FUOYE J Eng Technol. 2023;8(1).

Ran L, Halim D, Thein CK, Galea M, Zhao W. Optimized rotor structural design methodology for high-speed electrical machines based on mechanical characteristics. Mech Based Des Struct Mach. 2023;

Choong CG, McKay A. Sustainability in the Malaysian palm oil industry. J Clean Prod. 2014;85:258–64.

Azmi M. Perbaikan Mesin Repple Mill CB Modipalm Pemecah Biji Kelapa Sawit Nut Cracker. 2021;

Hikmawan O, Naufa M, Indriani BM. Pengaruh jarak rotor terhadap efisiensi pemecahan biji pada stasiun ripple mill di pabrik kelapa sawit. Indones J Ind Res. 2021;16(31):14–21.

Sinaga R, Christy J, Dahang D, Sembiring R, Sembiring S, Karo SB, et al. Pengaruh Modifikasi Jumlah Alur Dan Kecepatan Putar Rotor Bar Terhadap Produktivitas Dan Hasil Mesin Pemecah Kemiri Sistem Ripple Mill. J Agroteknosains. 2022;6(1):65–80.

Mohammadi SEM, Chen P, Moallem M, Fahimi B, Kiani M. An Alternate Rotor Geometry for Switched Reluctance Machine with Reduced Torque Ripple. IEEE Trans Energy Convers. 2022;

Gallardo C, Tapia JA, Degano M, Mahmoud H, Hoffer AE. Rotor Asymmetry Impact on Synchronous Reluctance Machines Performance. In: 2022 International Conference on Electrical Machines (ICEM). IEEE; 2022. p. 848–54.

Siregar AL, Zulfiah RD, Rahardja IB, Rantawi AB, Saputera H. Efficiency Analysis of Ripple Mill Capacity 6 Ton/Hours on Maintenance Machine. J Appl Sci Adv Technol. 2024;6(2):75–82.

Djoyowasito G, Sutan SM, Ahmad AM. Pengaruh Penambahan Lapisan Karet Pada Stator Dan Variasi Diameter Tongkol Jagung (Zea Mays L.) Terhadap Kinerja Mesin Pemipil Jagung Tipe Dmp J-2. J Keteknikan Pertan Trop Dan Biosist. 2019;7(2):172–84.

Downloads

Published

2024-05-15

Issue

Section

Articles