PENGARUH INTERLAYER PASTA (ZINC+TAPIOKA) PADA SAMBUNGAN FSSW MATERIAL ALUMUNIUM PADUAN
DOI:
https://doi.org/10.21776/jrm.v15i3.1740Keywords:
FSSW, Interlayer, Zinc, Hook DefectAbstract
Aluminum metal is widely applied in the industrial sector because it has many advantages. FSSW welding is a method that can be used to join aluminum. The microstructural test results show the flow distribution of the zinc interlayer in the welding area. The flow of zinc material looks dominant in the steering zone area. The hardness test results for the connection with zinc interlayer had the highest value of 147HV. Highest shear tensile testing on joints using zinc interlayer. The use of zinc interlayer has been proven to significantly improve connection capabilities.
References
J. Jn, U. H. Medan, and W. Weriono, “Karakteristik Material Aluminium Silicon Berdasarkan Masa,” Mesin dan Industri, no. November, pp. 1–7, 2018.
R. Rochman, P. Hariyati, and C. Purbo, “Karakterisasi Sifat Mekanik dan Pembentukan Fasa Presipitat pada Aluminium Alloy 2024 – T 81 Akibat Perlakuan Penuaan.,” Mekanika, vol. 8, no. 2, pp. 165–171, 2010.
T. Yang, L. Chen, Y. Zhuang, J. F. Liu, and W. L. Chen, “Arcs interaction mechanism in Plasma-MIG hybrid welding of 2219 aluminium alloy,” J Manuf Process, vol. 56, no. May, pp. 635–642, 2020, doi: 10.1016/j.jmapro.2020.05.014.
W. Lin, F. Li, X. Hua, and Z. Zhang, “Laser welding Al–Si coated hot stamping steel in conduction mode: weld formation and Al-rich microstructure,” Journal of Materials Research and Technology, vol. 19, pp. 4282–4295, 2022, doi: 10.1016/j.jmrt.2022.07.012.
B. han Ma, D. fang Ma, H. ran Wang, D. nian Chen, and F. hua Zhou, “Ballistic impact response of resistance-spot-welded (RSW) double-layered plates for Q&P980 steel,” Defence Technology, vol. 18, no. 6, pp. 1052–1064, 2022, doi: 10.1016/j.dt.2021.04.010.
C. Zhu, J. Cheon, X. Tang, S. J. Na, and H. Cui, “Molten pool behaviors and their influences on welding defects in narrow gap GMAW of 5083 Al-alloy,” Int J Heat Mass Transf, vol. 126, pp. 1206–1221, 2018, doi: 10.1016/j.ijheatmasstransfer.2018.05.132.
Q. wei GAO, F. yuan SHU, P. HE, and W. bo DU, “Microstructure and impact mechanical properties of multi-layer and multi-pass TIG welded joints of Al−Zn−Mg alloy plates,” Transactions of Nonferrous Metals Society of China (English Edition), vol. 29, no. 12, pp. 2496–2505, 2019, doi: 10.1016/S1003-6326(19)65157-5.
Z. L. Ni and F. X. Ye, “Weldability and mechanical properties of ultrasonic joining of aluminum to copper alloy with an interlayer,” Mater Lett, vol. 182, pp. 19–22, 2016, doi: 10.1016/j.matlet.2016.06.071.
J. M. Piccini and H. G. Svoboda, “Effect of the Tool Penetration Depth in Friction Stir Spot Welding (FSSW) of Dissimilar Aluminum Alloys,” Procedia Materials Science, vol. 8, pp. 868–877, 2015, doi: 10.1016/j.mspro.2015.04.147.
R. Z. Xu, D. R. Ni, Q. Yang, C. Z. Liu, and Z. Y. Ma, “Influencing mechanism of Zn interlayer addition on hook defects of friction stir spot welded Mg-Al-Zn alloy joints,” Mater Des, vol. 69, pp. 163–169, 2015, doi: 10.1016/j.matdes.2014.12.045.
B. H. Silva, G. Zepon, C. Bolfarini, and J. F. dos Santos, “Refill friction stir spot welding of AA6082-T6 alloy: Hook defect formation and its influence on the mechanical properties and fracture behavior,” Materials Science and Engineering A, vol. 773, no. October, p. 138724, 2020, doi: 10.1016/j.msea.2019.138724.
A. Boucherit, M. N. Avettand-Fènoël, and R. Taillard, “Effect of a Zn interlayer on dissimilar FSSW of Al and Cu,” Mater Des, vol. 124, pp. 87–99, 2017, doi: 10.1016/j.matdes.2017.03.063.
T. P. Saju and R. G. Narayanan, “Dieless friction stir extrusion joining of aluminum alloy sheets with a pinless stir tool by controlling tool plunge depth,” Journal of Materials Processing Tech., vol. 276, no. July 2019, p. 116416, 2020, doi: 10.1016/j.jmatprotec.2019.116416.
S. Wibowo, “PENGARUH PANJANG PIN TOOL DAN DWELLING TIME PADA SIFAT FISIK DAN MEKANIK PADA PENGELASAN FRICTION STIR SPOT WELDING DENGAN INTERLAYER ZINC,” 2017.
Q. Yang, S. Mironov, Y. S. Sato, and K. Okamoto, “Material flow during friction stir spot welding,” Materials Science and Engineering: A, vol. 527, no. 16–17, pp. 4389–4398, 2010, doi: 10.1016/j.msea.2010.03.082.
Y. H. Yin, N. Sun, T. H. North, and S. S. Hu, “Hook formation and mechanical properties in AZ31 friction stir spot welds,” J Mater Process Technol, vol. 210, no. 14, pp. 2062–2070, Nov. 2010, doi: 10.1016/j.jmatprotec.2010.07.029.
Y. C. Lin, J. J. Liu, and J. N. Chen, “Material flow tracking for various tool geometries during the friction stir spot welding process,” J Mater Eng Perform, vol. 22, no. 12, pp. 3674–3683, 2013, doi: 10.1007/s11665-013-0680-2.
R. Z. Xu, D. R. Ni, Q. Yang, C. Z. Liu, and Z. Y. Ma, “Influence of Zn interlayer addition on microstructure and mechanical properties of friction stir welded AZ31A Mg alloy,” J Mater Sci, vol. 50, no. 12, pp. 4160–4173, 2015, doi: 10.1007/s10853-015-8841-3.
Z. Zhang, X. Yang, J. Zhang, G. Zhou, X. Xu, and B. Zou, “Effect of welding parameters on microstructure and mechanical properties of friction stir spot welded 5052 aluminum alloy,” Mater Des, vol. 32, no. 8–9, pp. 4461–4470, 2011, doi: 10.1016/j.matdes.2011.03.058.
L. Arti Saputra, N. Muhayat, and T. Triyono, “Effect of Zn Interlayer Particles on Mechanical Properties and Microstructure of Friction Stir Spot Welding Aluminum Alloy,” in MATEC Web of Conferences, EDP Sciences, Oct. 2018. doi: 10.1051/matecconf/201821804005.
L. A. Saputra, N. A. Sukarno, and S. Zulaehah, “Pengaruh Interlayer Elektroplating Zinc pada Kekuatan Mekanik Friction Stir Spot Welding Aa1100-Ss400,” Semesta Teknika, vol. 24, no. 2, pp. 93–101, Nov. 2021, doi: 10.18196/st.v24i2.13015.
R. Z. Xu, D. R. Ni, Q. Yang, C. Z. Liu, and Z. Y. Ma, “Influencing mechanism of Zn interlayer addition on hook defects of friction stir spot welded Mg-Al-Zn alloy joints,” Mater Des, vol. 69, pp. 163–169, 2015, doi: 10.1016/j.matdes.2014.12.045.
L. Arti Saputra, “Pengaruh Hybrid Interlayer Partikel Zinc Pada Friction Stir Spot Welding Material AA1100-AA5052,” Rotasi, vol. 25, no. 3, pp. 40–45, 2023.
Y. Q. Zhao, H. J. Liu, S. X. Chen, Z. Lin, and J. C. Hou, “Effects of sleeve plunge depth on microstructures and mechanical properties of friction spot welded alclad 7B04-T74 aluminum alloy,” Mater Des, vol. 62, pp. 40–46, 2014, doi: 10.1016/j.matdes.2014.05.012.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Lingga Arti Saputra

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.