RANCANGAN SISTEM HIDROLIK PADA FRONT ATTACHMENT ALAT PERAGA MINI EXCAVATOR
DOI:
https://doi.org/10.21776/jrm.v15i2.1729Keywords:
Excavator, Hydraulic, Construction, Design, PerformanceAbstract
As one of the heavy equipment, an excavator is used to facilitate construction work and streamline time and energy. Hydraulic excavators are widely used in construction, mining, quarrying, and forestry applications. A hydraulic excavator is a type of heavy equipment that has several functions such as digging, loading, lifting, scraping, grading, braking, etc. One of the products which is developed by the Mechanical Engineering Department of Vocational School (SV-UGM) is the Mini Excavator. Mini Excavator has a function as excavators in general. A smaller size makes it easier to operate and apply in the field are more compact and do not require a large area. This equipment is expected to be the right teaching aid in supporting the learning process of students of the Heavy Equipment Management and Maintenance Engineering Study Program in the Mechanical Engineering Department. For the learning process to be optimal, the equipment used should be optimal. Therefore, in this research, the design and construction of the Traction Drive System for Backhoe Type Hydraulic Excavators will be carried out and some testing will also be conducted to know the performance of the mini excavator
References
R. Baharuddin and T. Hidayat, “Atmega Microcontroller 2560 Based Safety System of Monitor Panel and Controller on a Small Excavator,” J. Rekayasa Mesin, vol. 11, no. 3, pp. 367–374, 2020, doi: 10.21776/ub.jrm.2020.011.03.8.
Hasanuddin, “Buku Teknlogi Tenaga Fluida - Hasanuddin.” UNP PRESS, Padang, pp. 1–185, 2019.
R. Rustanto, A. T. Pratama, A. Febrianto, F. A. Syafutra, W. Septianugraha, and B. M. Walfitri, “Peningkatan Ketersediaan Fisik Dan Waktu Rata-Rata Antara Kegagalan Unit Komatsu Pc2000-8 Pada Pt. United Tractors, Tbk Dengan Metode Fmea,” J. Rekayasa Mesin, vol. 14, no. 2, pp. 371–384, 2023, doi: 10.21776/jrm.v14i2.1053.
B. Setiawan, “Perancangan Sistem Hydraulic pada Prototype Electric Sweeper Car,” Universitas Gadjah Mada, 2019.
N. Hendra, “Pembuatan Alat Peraga Sistem Hydraulic Miniatur Lengan Eksavator (Silinder Swing),” Universitas Sebelas Maret, 2013.
N. S. Roby, “Pembuatan Alat Praktikum Sistem Hydraulic,” Universitas Sebelas Maret, 2010.
Aziz. F.N, “Sistem Hydraulic Pada Excavator,” no. 2, pp. 1–4, 2019.
Satria. Dhimas, “Hydraulic & Pneumatik,” Universitas Sultan Ageng Tirtayasa, 2013.
L. A. N. Wibawa, U. S. Yudhotomo, Y. Haryanto, and A. Kurniawan, “Pengaruh Ketebalan Dinding Dan Tekanan Internal Terhadap Faktor Keamanan Tabung Motor Roket Dextrose Menggunakan Ansys Workbench,” Media Mesin Maj. Tek. Mesin, vol. 22, no. 2, pp. 76–84, 2021,
L. A. N. Wibawa, “Desain Dan Analisis Kekuatan Rangka Lemari Perkakas Di Balai Lapan Garut Menggunakan Metode Elemen Hingga,” Mach. J. Tek. Mesin, vol. 5, no. 2, pp. 45–50, 2019,
S. S. Francisco, “Series CHN Series CHN Small Bore Hydraulic Cylinder for 7 MPa,” no. mm, pp. 213–231.
Parker, “Fixed Displacement Gear Pumps,” 2002.
TECO, “Standard Motor Catalogue,” T. Group, Ed. Teco Group, 2014, pp. 1–28.
G. Teco, “squirrel cage induction motor - Bing images,” 1972,
Ansori, “RYCO Product Technical Manual,” Pap. Knowl. . Towar. a Media Hist. Doc., vol. 3, no. April, pp. 49–58, 2015.
Syaefudin, E. A”Rancang Bangun Excavator Sederhana Tipe Backhoe Berpenggerak Hidrolik”. Jurnal Konversi Energi dan Manufaktur, vol. 1(2), pp. 110-117, 2014.
N. Jonoadji and I. H. Siahaan, “FluidSIM Programmable Logic Controller Modul untuk Rancangan Mesin Press Hidraulik Botol Plastik,” Semin. Nas. Tek. Mesin, vol. 9, 2013
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Sigit Purwanto , Nyayu Aisyah , Braam Delfian , Radhian Krisnaputra , F. Eko Wismo , Irfan Bahiuddin
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
