ANALISIS KEKUATAN STRUKTUR SQUARE CHAMBER INJECTION MULTICASTING PYROGENIC IGNITER MENGGUNAKAN FINITE ELEMENT ANALYSIS (FEA)

Authors

  • Rama Dwi Prayoga BRIN
  • Ichsan Dwi Prasetyo
  • Maharani Inas Mahdiyyah

DOI:

https://doi.org/10.21776/jrm.v15i3.1726

Keywords:

FEA, Injection Molding, Strength analysis, Von Mises, Hydraulic Piston Pressure

Abstract

It is necessary to analyze the structural strength of the square chamber component in the design of injection multicasting pyrogenic igniter to ensure that the structural components of the chamber are able to withstand loads from hydraulic piston pressure. Four square chamber configurations were analyzed using the Autodesk Inventor software FEA method. Load simulations are given at 10,000 N, 50,000 N, and 100,000 N. Von Mises stress, safety factor, and displacement are obtained for each design configuration. Where it is known that the structural design of the square chamber design configurations 1, 2, and 3 has optimal reliability at a load capacity of up to ± 10,000 N. As for the structural design of the square chamber design configuration 4, it is known to have optimal reliability at a load capacity of 50,000 N. However it is possible that it is reliable enough to withstand load capacities up to ± 100,000 N.

References

H. Kuncoro and A. Yudha Pratama, “Analisis Rangka Mesin Pemisah Kuning Telur Menggunakan Software Solidworks 2020,” PRESISI, vol. 25, no. 1, 2023, Accessed: Oct. 02, 2023. [Online]. Available: https://ejournal.istn.ac.id/index.php/presisi/article/view/1456

A. M. A. Abidin, “Perancangan Pemutar Box Culvert Dalam Upaya Menghindari Terjadinya Cacat Pada Produk,” Universitas Hasanuddin, 2022. Accessed: Oct. 02, 2023. [Online]. Available: http://repository.unhas.ac.id/id/eprint/14490/

S. Insano and H. S. B. Rochardjo, “Optimasi Desain Struktur Train Nose Frame dengan Finite Element Analysis,” KONSTELASI: Konvergensi Teknologi dan Sistem Informasi, vol. 3, no. 1, pp. 73–84, Jun. 2023, doi: 10.24002/konstelasi.v3i1.7089.

L. Wibawa, Merancang Komponen Roket 3D dengan Autodesk Inventor Professional 2017. 2018.

L. Wibawa, “Desain dan Simulasi Elemen Hingga Gantry Crane Kapasitas 9 Ton Menggunakan Autodesk Inventor 2017,” vol. 11, pp. 41–48, Oct. 2019, doi: 10.33504/manutech.v11i02.108.

Z. P. Endry, “Stiffness And Strength Evaluation of Composite Material for Static Load Of Widya Wahana V Body and Chassis,” Institut Teknologi Sepuluh Nopember, 2015.

L. Wibawa, K. Diharjo, W. Raharjo, and B. H. Jihad, “The Effect of Fillet Radius And Length of The Thick-Walled Cylinder on Von Mises Stress And Safety Factor for Rocket Motor Case,” in AIP Conference Proceedings, Oct. 2020. doi: 10.1063/5.0030329.

A. B. Prasetiyo, K. A. Sekarjati, and Sutrisna, “Numerical Analysis of The Influence Iron Type On Von Mises Stress And Safety Parameters for Compost Processing Machine Frame Construction,” IOP Conf Ser Earth Environ Sci, vol. 1151, no. 1, p. 12058, Mar. 2023, doi: 10.1088/1755-1315/1151/1/012058.

A. Fikri, A. Muarif, R. Mulyawan, and Nursakinah, “Analisis Tegangan Pada Bone Plate Stainless Steel 316L untuk Aplikasi Biomateria,” Current Biochemistry, vol. 10, pp. 17–23, Sep. 2023, doi: 10.29244/cb.10.1.3.

A. A. N. Santoso, D. T. Santoso, and Aripin, “Analisis Kekuatan Rangka pada Perangkat Grading Fish menggunakan Software Solidworks,” Jurnal Kajian Teknik Mesin, vol. 8, no. 1, pp. 111–120, 2023, doi: https://doi.org/10.52447/jktm.v8i1.6985.

L. Wibawa, “Desain dan Analisis Tegangan Alat Pengangkat Roket Kapasitas 10 Ton Menggunakan Metode Elemen Hingga,” vol. 2, pp. 23–26, Oct. 2019, doi: 10.33795/jetm.v2i01.31.

L. Wibawa, “Desain dan Analisis Kekuatan Rangka Tempat Sampah di Balai LAPAN Garut Menggunakan Metode Elemen Hingga,” vol. 1, pp. 64–68, Oct. 2018, doi: 10.36767/turbulen.v1i2.352.

V. V Dobrovolsky and A. A. Troitsky, Machine Elements : A Textbook. 1977. [Online]. Available: https://api.semanticscholar.org/CorpusID:60075499

M. N. A. Mukhtar, T. Koesdijati, S. Rochman, E. Nasrulloh, and L. Hidayat, “Analisis Desain Stator Generator Tipe Magnet Permanen Fluks Aksial Menggunakan Metode Finite Element Analysis (FEA),” ELEMEN : JURNAL TEKNIK MESIN, vol. 8, no. 2, pp. 149–156, Aug. 2022, doi: 10.34128/je.v8i2.173.

E. Prasetyo, R. Hermawan, M. Ridho, I. Hajar, H. Hariri, and E. Pane, “Analisis Kekuatan Rangka Pada Mesin Transverse Ducting Flange (TDF) Menggunakan Software Solidworks,” Rekayasa, vol. 13, pp. 299–306, Oct. 2020, doi: 10.21107/rekayasa.v13i3.8872.

Downloads

Published

2024-12-15

How to Cite

Prayoga, R. D., Prasetyo, I. D., & Mahdiyyah, M. I. (2024). ANALISIS KEKUATAN STRUKTUR SQUARE CHAMBER INJECTION MULTICASTING PYROGENIC IGNITER MENGGUNAKAN FINITE ELEMENT ANALYSIS (FEA). Jurnal Rekayasa Mesin, 15(3), 1483–1492. https://doi.org/10.21776/jrm.v15i3.1726

Issue

Section

Articles