PENGARUH MATERIAL TERHADAP DEFORMASI, STRAIN, DAN SAFETY FACTOR PADA BRACKET CALIPER MENGGUNAKAN METODE ELEMEN HINGGA
DOI:
https://doi.org/10.21776/jrm.v15i3.1700Keywords:
Deformation, Equivalent Elastic Strain, Safety Factor, Bracket Calliper, Static AnalysisAbstract
The purpose of this study is to analyze the deformation, equivalent elastic strain, and safety factor of a bracket bracket made from two different materials by using the Finite Element Method, specifically aluminum alloy 6061 T6 and cast iron EN GJL 100. The result of this study is that the Aluminum Alloy 6061T6 material has a deformation of 3.57E-04 whereas the Cast iron EN GJL 100 material is 2.75E-04. In the elastic strain equivalent test, the Aluminium alloy 6061 T6 material is 3.00-E07 and in the Cast Iron EN G JL 100 materials is 2.32E-07. In the safety factor test, Cast Iron En G J L 100 material was better than 1.8617 compared to the Alumium Alloys 60 61 T6 materials are 1.5125. This shows that Cast Iron E GJ L 100 materials are better in deformations, eqeuivalent elastic stations, and safety factors in this case.
References
S. R. Wu and C. James, “Advanced Development of Explicit FEA in Automotive Applications Computer Methods in Applied Mechanics and Engineering,” vol. 149, pp. 189–199, 1997.
M. Kamal, M. M. Rahcman, and A. G. A. Rahman, “J Mech Sci 3,” vol. 3, pp. 291–300, 2012.
M. Kamal, M. M. Rahman, and R. A. G. A, “Inter J Automot Mech Eng 7,” vol. 7, no. 912–923, 2013.
M. Mahendra, “Applications of Finite Element Analysis in Structural Engineering,” Proc. Int. Conf. Comput. Aided Eng., pp. 38–46, 2007.
A. Zulkifli, A. K. Ariffin, and M. M. Rahman, “Inter J Automot Mech Eng 3,” pp. 256–264, 2011.
R. Daud, A. K. Ariffin, and S. Abdullah, “Inter J Automot Mech Eng 7,” Inter J Automot Mech Eng 7, pp. 995–1006, 2013.
S. Huzni, M. Ilfan, T. Sulaiman, S. Fonna, M. Ridha, and A. K. Arifin, “Inter J Automot Mech Eng 7,” pp. 1023–1030, 2013.
A. L. Newberry, “FEA Modeling Proves its Worth in Composite Design in RP Asia,” Conf. Held Kuala Lumpur Malaysia 20-22 Sept. 2000, 2000.
K. Kardigama, M. M. Rahman, A. R. Ismail, and R. A. Bakar, “J Mech Eng Sci 1,” pp. 37–66, 2020.
M. S. Najiha, M. M. Rahman, A. R. Yusoff, and K. Kardigama, “Inter J Automot Mech Eng 6,” pp. 766–744, 2021.
D. of A. E. S. U. of Colorado, “Introduction to Finite Element Methods (ASEN 5007 ) Ch. 6 FEM Modelling: Introduction,” 2012. http://www.colorado.edu/engineering/cas/courses.d/ IFEM.d/IFEM.Ch06.d/IFEM.Ch06.pdf (accessed Jun. 21, 2023).
D. L. Logan, “A Forst Course in The Finite Element Method 4th ed,” Canada Thomsom Canada Ltd., 2007.
Berlioz and Trompette, “Solid Mechanics Using The Finite Element Method,” USA John Wiley Sons Inc, 2010.
G. Ma and J. Zhou, “Finite Element Analysis of an Ammunition Bracket,” 2021.
F. Prunier and D. Branque, “Definition of a safety factor using the finite element method in geomechanics, from a static to dynamic regime,” Eur. J. Environ. Civ. Eng., vol. 26, pp. 144–165, 2019.
L. A. N. Wibawa, “Pengaruh Pemilihan Material Terhadap Kekuatan Rangka Main Landing Gear Untuk Pesawat UAV,” J. Teknol. Dan Terap. Bisnis, vol. 2, no. 1, pp. 48–52, 2019.
Matweb, “MatWeb, Your Source for Materials Information,” MatWeb, pp. 1–2, 2015, [Online]. Available: http://www.matweb.com/search/datasheet.aspx?MatGUID=ff6d4e6d529e4b3d97c77d6538b29693.
J. Pelleg, Mechanical properties of materials, vol. 190. 2013.
M. Pekin, “Design and Construction of a Motorcycle Drum To Disc,” 2020.
Rugarli, “Structural Analysis with Finite Elements,” UK Thomas Telford Ltd., 2010.
P. Boeraeve, “Introduction to The Finite Element Method,” 2012. www.gramme.be/unite9/FEM/Finite Element Method.pdf. (accessed Jun. 20, 2023).
I. N. Gusniar and S. A. Ibrahim, “Analisis Gaya pada Rem Cakram (Disk Brake) pada Kendaraan Roda Dua (Honda Beat Sporty 2017),” J. Pendidik. Tek. Mesin, vol. 8, no. 2, pp. 110–120, 2021.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Andi Abdullah Ghyferi, Aldias Bahatmaka, Muhammad Yusuf Wibowo, Ahmad Anwar, Ayyub Ridananda, Anggi Vandika

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.