UJI KARAKTERISTIK BAHAN BAKAR ALTERNATIF HASIL PENGOLAHAN LIMBAH SAMPAH PLASTIK DENGAN METODE PIROLISASI BERTINGKAT

Authors

  • La Baride Baride Universitas Dayanu Ikhsanuddin
  • Muhamad Iqbal Achmad Universitas Dayanu Ikhsanuddin
  • Tasman Universitas Dayanu Ikhsanuddin

DOI:

https://doi.org/10.21776/jrm.v15i3.1561

Keywords:

Characteristics, Alternative Fuels, Plastics, Multilevel Pyrolysis

Abstract

This study aims to determine the characteristics and quantity of oil produced from first and second level pyrolysis. The method in this research is an experiment with a pyrolysis tool designed in two levels. The advantage of this pyrolysis tool compared to other pyrolysis tools is that it is expected to produce two fuels with different physical and chemical properties. The results of the study showed that for the first level of pyrolysis PP plastic, 855.7 grams of oil was produced with the following characteristics: density @15°C = 754 kg/m³, final boiling point = 264.9°C, distillation @200°C = 71.8% v/v. while in the second level pyrolysis for the PP plastic type, it produces 138.5 grams of oil with the following characteristics: density @15°C = 718.5 kg/m³, distillation at 10% evaporation volume = 74.4°C, distillation at 50% evaporation volume = 123°C, and distillation at 90% evaporation volume = 142.1°C, final boiling point = 189.7°C. The first level pyrolysis process on HDPE plastic initially only produced 418 grams of oil with the following characteristics: density @15°C = 751.5 kg/m³, final boiling point = 279.4°C, distillation @200°C = 70.9%v/v. The fuel produced from the first level pyrolysis process has characteristics comparable to kerosene, while the fuel produced in the second level pyrolysis process has characteristics equivalent to 88 octane fuel.

References

F. L. Savira and Okik. H., “Pirolisis sampah plastik sebagai bahan bakar alternatif dengan penambahan sampah ranting,” Jurnal Envirotek, v. 9, n. 2, 2018

I. G. N. N. Santhiarsa, “Rancang bangun alat konversi plastik menjadi bahan bakar minyak dengan metode pirolisis untuk penanganan sampah plastik,” Jurnal Rekayasa Mesin, v. 13, n. 1, pp. 189–196, 2022.

Sumartono, “Produksi bahan bakar minyak dari limbah plastik HDPE dan PETE 1 kg,” Jurnal Rekayasa Material, Manufaktur dan Energi, v. 2, n. 2, pp. 94–103, 2019.

B. Sugiarto, J. R. Arfianto, and K. Monika, “Pembuatan bahan bakar minyak (BBM) dari sampah plastik menggunakan proses pirolisis,” Prosiding Seminar Nasional Teknik Kimia “Kejuangan” Pengembangan Teknologi Kimia untuk Pengolahan Sumber Daya Alam Indonesia, pp.1- 6, Yogyakarta, Juli 2020.

J. A. Riandis, A. R. Setyawati, and A. S. Sanjaya, “Pengolahan sampah plastik dengan metode pirolisis menjadi bahan bakar minyak,” Jurnal Chemurgy., v. 05, n. 1, pp. 8–14, 2021.

M. S. Cahyono, S. Haryono, and W. W. Mandala, “Proses pirolisis untuk mengkonversi limbah plastik menjadi bahan bakar minyak menggunakan penyaringan adsorban (arang dan zeolit),” Jurnal Offshore, v. 5, n. 2, pp. 77-81, 2021.

N. M. Wedayani, “Studi pengelolaan sampah plastik di pantai kuta sebagai bahan bakar minyak,” Jurnal Presipitasi Media Komunikasi dan Pengembangan Teknik Lingkungan, v. 15, n. 2, pp. 122-126, 2018.

Nurhayati, S. Viridi, A.P. Asmara, Z. Aina, “Rancang bangun alat pirolisis sederhana untuk mengolah limbah plastik polipropilena (PP) menjadi Bahan bakar cair (BBC),” Prosiding SNIPS, pp. 116–122, Juli, 2018.

Y. H. A. Nofendri, “Perancangan alat pirolisis sampah plastik menjadi bahan bakar” Jurnal Kajian Teknik Mesin, v. 6 n. 1, pp. 1–11, 2021.

Nuryosuwito, Sudjito, W. Wijayanti, M.N. Sasongko., “Pengaruh campuran sampah plastik dengan katalis alam terhadap hasil produk pyrolisis,” Jurnal Rekayasa Mesin, v. 9, n. 2, pp. 85–91, 2018.

A. Islami, S. Sutrisno, and H. Heriyanti, “Pirolisis sampah plastik jenis polipropilena (PP) menjadi bahan bakar cair-premium-like,” JC-T (Journal Cis-Trans) Jurnal Kimia. dan Terapannya., v. 3, n. 2, pp. 1–6, 2019.

D. Andreas Lubis, Y. Fitrianingsih, S. Pramadita, and G. Christiadora Asbanu, “Pengolahan sampah plastik HDPE (High Density Polyethylene) dan PET (Polyethylene Terephtalate) sebagai bahan bakar alternatif dengan proses pirolisis,” Jurnal Ilmu Lingkungan, v. 20, n. 4, pp. 735–742, 2022.

Dewi Amalia Ardianti, Aldy Amiruddin Najib, Faisal Nur Hakim, Uhti Setiorini, Sri Suryaningsih, “Rancang bangun alat pengkonversi sampah plastik menggunakan metode pirolisis menjadi bahan bakar minyak dalam upaya penanganan masalah lingkungan,” Jurnal Ilmu dan Inovasi Fisika., v. 3, n. 2, p. 91-96, 2019.

Pertamina, “Spesifikasi Produk BBM, BBN & LPG,” Spesifikasi Prod. BBM, BBN LPG, p. 23, 2020.

A. D. Korawan, “Peningkatan kwalitas hasil penyulingan minyak tradisional,” Jurnal Penelitian dan Pengabdian Kepada. Masyarakat UNSIQ, v. 7, n. 3, pp. 305–308, 2020.

Downloads

Published

2024-12-15

How to Cite

Baride, L. B., Achmad , M. I., & Tasman. (2024). UJI KARAKTERISTIK BAHAN BAKAR ALTERNATIF HASIL PENGOLAHAN LIMBAH SAMPAH PLASTIK DENGAN METODE PIROLISASI BERTINGKAT. Jurnal Rekayasa Mesin, 15(3), 1281–1289. https://doi.org/10.21776/jrm.v15i3.1561

Issue

Section

Articles