PENGEMBANGAN PRODUK CASING ALAT KESEHATAN PEMANTAUAN INFUS PINTAR (MIFUS) DENGAN METODE RAPID TOOLING

Authors

  • Riona Ihsan Media Politeknik Manufaktur Bandung
  • Roni Kusnowo Politeknik Manufaktur Bandung
  • Yogi Muldani Hendrawan Politeknik Manufaktur Bandung
  • Hafez Trimukti Ali Musa Politeknik Manufaktur Bandung

DOI:

https://doi.org/10.21776/jrm.v15i1.1479

Keywords:

3D Printing, 3D Scanning, Rapid Tooling, Penyusutan Epoxy, Resin Polymer

Abstract

MiFUS® is a tool that can display the patient's infusion condition so that nurses can monitor patients one by one in a short time simultaneously. Several nurses were involved in this study to provide input to the casing. Product design is done at the beginning to know the initial casing design. Next, the manufacture of casing molds is carried out using a 3D printing machine. The results of the 3D printer are used as a Master Mold for the implementation of Rapid Tooling method with Epoxy material. The solution of product development is catalyst ratio analysis on polyester resin to obtain the optimal ratio of properties including shrinkage and strength of the material to withstand mechanical loads. Validation of shrinkage is carried out using 3D Scanning technology to determine the deviation of dimensions in the casing made against CAD data. Meanwhile, to obtain the strength parameters of the material to withstand mechanical loads, tensile testing is carried out. The results of this study are the contribution of design parameters, namely the amount of shrinkage that occurs and the strength parameters of the material to withstand mechanical loads. The Data and information are presented in the form of product prototypes and user analysis feasibility studies.

Author Biography

Riona Ihsan Media, Politeknik Manufaktur Bandung

Department of Manufacturing Design Engineering

References

“Sistem Monitoring Kesehatan Berbasis Internet Of Things (IoT) | Ratna | AL-ULUM: Jurnal Sains Dan Teknologi.” https://ojs.uniska-bjm.ac.id/index.php/JST/article/view/2913/2084 (accessed Jan. 29, 2023).

S. Tedesco et al., “Design of a Multi-Sensors Wearable Platform for Remote Monitoring of Knee Rehabilitation,” IEEE Access, vol. 10, pp. 98309–98328, 2022.

P. Lynch, C. R. Hasbrouck, J. Wilck, M. Kay, and G. Manogharan, “Challenges and opportunities to integrate the oldest and newest manufacturing processes: metal casting and additive manufacturing,” Rapid Prototyp. J., vol. 26, no. 6, pp. 1145–1154, 2020.

H. K. Balakrishnan et al., “3D printing: An alternative microfabrication approach with unprecedented opportunities in design,” Anal. Chem., vol. 93, no. 1, pp. 350–366, 2020.

M. Mele, M. Ricciarelli, and G. Campana, “3D printing of clay paste enhanced by scrap polymer from powder bed processes,” Rapid Prototyp. J., vol. 28, no. 2, pp. 285–296, 2022.

T. Sathies, P. Senthil, and M. S. Anoop, “A review on advancements in applications of fused deposition modelling process,” Rapid Prototyp. J., vol. 26, no. 4, pp. 669–687, 2020.

M. Liu, S. Fang, H. Dong, and C. Xu, “Review of digital twin about concepts, technologies, and industrial applications,” J. Manuf. Syst., vol. 58, pp. 346–361, 2021.

J. C. Najmon, S. Raeisi, and A. Tovar, “Review of additive manufacturing technologies and applications in the aerospace industry,” Addit. Manuf. Aerosp. Ind., pp. 7–31, 2019.

V. Kumar, A. Kumar, S. S. Han, and S.-S. Park, “RTV silicone rubber composites reinforced with carbon nanotubes, titanium-di-oxide and their hybrid: Mechanical and piezoelectric actuation performance,” Nano Mater. Sci., vol. 3, no. 3, pp. 233–240, 2021.

A. R. Fadhillah, S. A. Setiyabudi, and A. Purnowidodo, “Karakteristik komposit serat kulit pohon waru (Hibiscus Tiliaceus) berdasarkan jenis resin sintetis terhadap kekuatan tarik dan patahan komposit,” J. Rekayasa Mesin, vol. 8, no. 2, pp. 101–108, 2017.

C. Pramono, S. Widodo, and M. G. Ardiyanto, “Karakteristik Kekuatan Tarik Komposit Berpenguat Serat Ampas Tebu Dengan Matriks Epoxy,” J. Mech. Eng., vol. 3, no. 1, pp. 1–7, 2019.

M. K. Asrori, E. N. Hidayah, and H. Wibisana, “Analisis Kinerja Resin Immobilized Photocatalyst dalam Meningkatkan Kualitas Efluen Limbah Cair,” Envirotek J. Ilm. Tek. Lingkung., vol. 14, no. 2, pp. 152–158, 2022.

S. Hasan, B. Maryanti, and H. A. Puspito, “Analisis Kekuatan Impact Komposit Berpenguat Serat Pelepah Batang Salak Dengan Resin Polyester Menggunakan Fraksi Volume,” J. Rekayasa Mesin Dan Inov. Teknol., vol. 2, no. 2, pp. 137–142, 2021.

A. S. Mokar and M. Mukhlis, “Analisis Pengaruh Komposisi Lapisan/Laminat Terhadap Kekutan Impak pada Komposit Hybrid Serat Jute, Glass dan Resin Yukalac 157 Katalis,” DINAMIKA, vol. 6, no. 2, 2022.

A. Muda, “Analisis Pengaruh Variasi Konsentrasi Katalis Terhadap Kekuatan Impak Komposit Resin Epoxy Diperkuat Serat Sabut Kelapa,” PhD Thesis, Universitas Mercu Buana Bekasi, 2020.

D. Saragih, “Analisis Kekuatan Mekanik Material Komposit Berserat Sabut Kelapa yang Berpeluang Diaplikasikan pada Pembuatan Spakbor Sepeda Motor,” PhD Thesis, Universitas Medan Area, 2022.

Downloads

Published

2024-05-15

Issue

Section

Articles