SIMULASI NUMERIK DESAIN CRADDLE DECK DERMAGA KAPAL 150 GT

Authors

  • Mohammad Sholikhan Arif Institut Teknologi Sepuluh Nopember
  • Heri Supomo Institut Teknologi Sepuluh Nopember
  • Triwilaswandio W. Pribadi Institut Teknologi Sepuluh Nopember
  • Sufian Imam Wahidi Institut Teknologi Sepuluh Nopember
  • Rizky Chandra Ariesta Institut Teknologi Sepuluh Nopember
  • Sri Rejeki Wahyu Pribadi Institut Teknologi Sepuluh Nopember

DOI:

https://doi.org/10.21776/jrm.v14i1.1111

Keywords:

Cradle, Design, Ship, Dock, Stress, BKI, Sluggishness

Abstract

Cradle is a lifting tool used to transport ships. The innovation of the cradle design as a deck tool for transporting ships to the dock is a breakthrough to simplify the transportation process. Of course, in the design process, a method is needed to get a design that meets the standard. Numerical simulation is a method that is applied to determine the stress that occurs in the cradle when it is subjected to a load. The workload is a ship transported with the assumption that the load is evenly distributed along with the cradle. The design acceptance criteria were chosen based on the ability of the cradle structure to withstand axial and transverse loads. The standard code as a reference uses the allowable stress criteria from the Indonesian Classification Bureau (BKI) in each local stress. Based on the simulation results, it is found that the sluggishness of the planned cradle design is able to withstand the workload so that the cradle design is feasible to be applied to the operational process.

 

References

ARIF, M.S., PRIBADI, S.R.W., PUTRA, W.H.P.,“Design and Production of FRP Catamaran Boat for Better River Transportation in Randuboto Village, Sedayu District, Gresik Regency”, In Proceedings of the 6th International Seminar on Ocean and Coastal Engineering, Environmental and Natural Disaster Management (Scitepress), pp. 82–86, Surabaya, January, 2020.

SUJIATANTI, S.H, YULIANTO, T, PUTRA, W.H.P., “Influence of the Cut-out Shape on the Fatigue Ship Structural Detail", In Proceedings of the 6th International Seminar on Ocean and Coastal Engineering, Environmental and Natural Disaster Management (Scitepress), pp. 111-115, Surabaya, January, 2020.

HASANUDIN, “Modifikasi Kapal Purse Seine 30 Gt Dengan Menambahkan Cadik Untuk Meningkatkan Survival Of Intact Stability", Marine Fisheries: Journal of Marine Fisheries Technology and Management, v. 10, n. 2, pp. 205-213, November, 2019.

ARIESTA, R. C, ALIFFRANANDA, M.H.N., RIYADI, S., “An Investigation into the Justification of the Service Speed of Ro-Ro Ferry with Block Coefficient 0.8 Based on the Resistance and Seakeeping Performance”, International Conference on Ship and Offshore Technology (ICSOT), pp. 19–20, Surabaya, November, 2021.

KEMENPERIN, Kemenperin Pacu Peran Industri Perkapalan. https://www.kemenperin.go.id/artikel/19815/Kemenperin-Pacu-Peran-Industri-Perkapalan-Topang-Sektor-Migas. Diakses: September 2021.

RAHARJO, R, “Desain Manufaktur Bracket Aluminium”, Rekayasa Mesin, v. 9, n. 2, pp. 119–125, Agt. 2018.

MISBAH, M. N., SUJIATANTI, S.H., SETYAWAN, D., “Structural analysis on the block lifting in shipbuilding construction process”, MATEC Web Conference, v. 177, pp. 1–6, 2018.

YULIANTO, T, “Analisis Kekuatan Shaft Propeller Kapal Rescue 40 Meter dengan Metode Elemen Hingga”, Kapal: Jurnal Ilmu Pengetahuan dan Teknologi Kelautan., v. 16, n. 3, pp. 100–105, 2019.

ISMAIL, A, “Study of Sandwich Panel Application on Side Hull of Crude Oil Tanker,” Journal. Applied Engineering Sciences, v.19, n. 4, pp. 1090-1098, 2021.

PRATAMA, P. D, "Analisis Teknis dan Ekonomis Pembangunan Self Propeller Floating Dock sebagai Penunjang Bisnis Reparasi Kapal Ikan 150 GT di Kawasn Pesisir Indonesia Timur," Jurnal Teknik ITS, v. X, n. Y, pp. 1-6, 2020.

ARIESTA, R.C, “Identifikasi Kerusakan pada Pelat Sandwich Lambung Sisi Menggunakan Metode Elemen Hingga”, Wave: Jurnal Ilmu Teknologi Maritim, v. 14, n. 2, pp. 83–90, 2020.

FELANI, D. H, “Analisis Statis Konstruksi Dan Lance Tube Sootblower Tipe Motorised Rotary Menggunakan Software Solidworks 2016”, Rekayasa Mesin, v. 12, n. 2, pp. 243 – 250, Agt. 2021

KKP, Jumlah Kapal, https://statistik.kkp.go.id/home.php?m=kapal&i=5. Diakses: Agustus 2021.

LOGAN, D. L, A first course in the finite element method, 4 ed., Canada, Chris Carson, 2007.

TUSWAN, T “A numerical evaluation on nonlinear dynamic response of sandwich plates with partially rectangular skin / core debonding”, Curved Layered Structure, v. 9, n. 1, pp. 25–39, 2022.

BKI, "Rules for Hull Volume 2", 2021 ed., Indonesia, Biro Klasifikasi Indonesia, 2021.

Downloads

Published

2023-05-29

Issue

Vol. 14 No. 1 (2023)

Section

Articles

License

Copyright (c) 2023 Mohammad Sholikhan Arif

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.