APLIKASI GAS HHO PADA SEPEDA MOTOR INJEKSI DENGAN MODIFIKASI ECU AFTERMARKET (TIMING PENGAPIAN)

Authors

  • Indah Puspitasari Politeknik Negeri Madiun
  • Noorsakti Wahyudi Politeknik Negeri Madiun
  • Kuntang Winangun Universitas Muhammadiyah Ponorogo
  • Fadil Noor Rofiq Politeknik Negeri Madiun

DOI:

https://doi.org/10.21776/jrm.v13i2.1108

Keywords:

HHO Gas, Engine Performance, Ignition Timing, Dynotest Measuring Instrument

Abstract

HHO gas is a gas produced from electrolysis, which is the decomposition of an electrolyte using an electric current which produces Hydrogen Gas and Oxygen Gas / Hydrogen Hydrogen Oxygen. The purpose of this study was to determine the application of HHO gas by increasing ignition timing by 3º, 6º, and 9º using an aftermarket ECU on engine performance and injection motor emissions. The method used in this study is an experiment, testing using a dinotest measuring instrument and a gas analyzer. The results obtained are the highest average power value in all tests obtained on the variable use of HHO Gas without variations in ignition timing using an aftermarket ECU of 5.90 HP at 3500 Rpm engine speed, an increase of 0.13% from the conditions of HHO Gas usage and forward time. . ignition of 3º and 6º, an increase of 0.27% from HHO gas usage conditions and a forward ignition time of 9º. Then the highest average torque value from all tests was obtained on the variable using HHO Gas and variations in ignition timing using an aftermarket ECU with an advance of 3º of 14.39 Nm at 3000 rpm engine speed, an increase of 0.29% from conditions using HHO Gas without using Variation ignition timing using aftermarket ECU.

References

BPPT, Outlook Energi Indonesia 2018, vol. 53, no. 9. 2018.

K. PEMBAKARAN, D. D. VARIASI, and K. C. BENSIN-, “Droplet Dengan Variasi,” no. May 2019, pp. 1–9, 2020.

L. P. G. T. LITERATUR, “V10 n2,” no. May, pp. 199–207, 2019.

A. WIJIANTO, “Pengaruh Gas Hydrogen Yang Dihasilkan Dari Kaleng Bekas Pada Getaran Dan Kebisingan Engine Diesel Dual Fuel,” J. Elektro dan Mesin Terap., vol. 2, no. 1, pp. 27–33, 2016, doi: 10.35143/elementer.v2i1.65.

D. SETO, S. DAN, and B. SUDARMANTA, “Aplikasi Penggunaan Generator Gas HHO Tipe Dry Cell Menggunakan Plat Titanium Terhadap Performa Dan Emisi Gas Buang Honda Megapro 150 cc,” vol. 4, no. 1, 2015.

I. PUSPITASARI, “Studi Komparasi Distribusi Temperatur Nyala Api Blow-Torch Kerosin dan Mixing Kerosin + Gas HHO Comparison Study of Temperature Distribution in Blowtorch Flame Kerosene Fueled and Mixture of Kerosene + HHO Gas,” 2015.

I. PUSPITASARI, “Modifikasi Cylinder Head Dan Injeksi Gas Hho Terhadap Performa Mesin 4 Langkah 1 Silinder,” JTT (Jurnal Teknol. Terpadu), vol. 8, no. 1, pp. 1–6, 2020, doi: 10.32487/jtt.v8i1.753.

INDAH PUSPITASARI, “Modifikasi Cylinder Head dan Injeksi Gas HHO terhadap Performa Mesin 4 Langkah 1 Silinder,” 2020.

Available at:

https://www.researchgate.net/publication/340973841_MODIFIKASI_CYLINDER_HEAD_DAN_INJEKSI_GAS_HHO_TERHADAP_PERFORMA_MESIN_4_LANGKAH_1_SILINDER.

I. PUSPITASARI and D. S. KAWANO, “Studi Komparasi Distribusi Temperatur Nyala Api pada Blow-Torch Kerosin dan Mixing Kerosin + Gas HHO,” pp. 978–979, 2015.

MISRU RAZI, EKO SISWANTO, WIDYA WIJAYANTI, “Pengaruh Derajat Pengapian Terhadap Kinerja Motor Bakar 6 Langkah Berbahan Bakar Etanol,” Jurnal Rekayasa Mesin, vol. 10 no 3, pp. 217–226, 2019.

B. Y. KRISWINARTO, I. G. K. SUKADANA, I. WYN, B. ADNYANA, M. NURYASIN, and A. SUPRIHADI, “Pengaruh Variasi Timing Pengapian terhadap Torsi, Daya dan Konsumsi Bahan Bakar Mesin Injeksi 1500 CC,” Nozzle J. Mech. Eng., vol. 3, no. 1, pp. 1–9, 2020.

B. D. CAHYO and M. R. AL FAUZI, “Analisa Pengaruh Ignition Timing Terhadap Daya dan Torsi Piston Engine SOHC Four Stroke,” J. Penelit. Politek. Penerbangan Surabaya, vol. 5, no. 2, pp. 29–37, 2020.

A. M. PUTRA, “Analisis Produktifitas Gas Hidrogen Dan Gas Oksigen Pada Elektrolisis Larutan Koh,” J. Neutrino, vol. 2, no. 2, pp. 141–154, 2012, doi: 10.18860/neu.v0i0.1642.

RISWAN SEPRIYATNO, EKO SISWANTO, NURKHOLIS HAMIDI, “Performa pada Motor Bakar 6-Langkah dengan Langkah Power Ekspansi Sampai Titik Mati Bawah,” Jurnal Rekayasa Mesin, vol. 12 no. 2, pp. 411–419, 2021.

B. SUDARMANTA, “Application of Dry Cell Hho Gas Generator With Pulse Width Modulation on Sinjai Spark Ignition Engine Performance,” Int. J. Res. Eng. Technol., vol. 05, no. 02, pp. 105–112, 2016, doi: 10.15623/ijret.2016.0502019.

A. FAHRUDDIN, “Studi Eksperimen Karakteristik Generator HHO Model Wet Cell dengan Elektroda Pelat Berlubang (Characteristics Experimental Study of Wet Cells HHO Generator with Perforated Plate Electrode)”, Journal of Electrical and Electronic Engineering vol. 1, no. 1, pp. 1–6, 2015. doi: 10.21070/jeee-u.v1i1.25.

DHARU SETO SUHANGGORO and B. SUDARMANTA, “Aplikasi Penggunaan Generator Gas HHO Tipe Dry Cell Menggunakan Plat Titanium Terhadap Performa Dan Emisi Gas Buang Honda Megapro 150 cc,” J. Tek. ITS, vol. 4, no. 1, 2017.

K. WINANGUN, “Uji Emisi Penggunaan Bioetanol Dari Tetes Tebu Sebagai Campuran Premium Dengan Oktan Booster Pada Sepeda Motor Yamaha Vega ZR 2009,” J. Pendidik. Tek. Mesin, vol. 19, no. 1, pp. 25–31, 2009, doi: 10.2964/jsik.19-25.

Downloads

Published

2022-08-31

Issue

Vol. 13 No. 2 (2022)

Section

Articles

License

Copyright (c) 2022 Indah Puspitasari

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.