ANALISIS KEKUATAN IMPACT DAN MODEL PERPATAHAN KOMPOSIT POLYESTER BERPENGUAT SERAT ALAM IJUK

Authors

  • Kadek Rihendra Dantes Universitas Pendidikan Ganesha
  • Edi Elisa Universitas Pendidikan Ganesha
  • I Made Pasek Budi Susila Universitas Pendidikan Ganesha

DOI:

https://doi.org/10.21776/jrm.v14i2.1105

Keywords:

Fibers Type, Impact Forces, Fracture Model

Abstract

The objective of this study is to find significant differences in impact forces between continuous, discontinuous, and woven fiber type of polyester composites with natural palm fibers and to find out the description of the microfracture structure. This study used experimental methods with independent and dependent variables. The independent variables are continuous, discontinuous, and woven fiber type. Then, the dependent variable was impact forces. Based on the results of tests, show that results from the average score at continuous fiber type = 1.082.88 J/m2, discontinuous = 794.67 J/m2 and woven = 1.427.06 J/m2. The conclusion of this study is that between various fiber orientations was a significant difference in impact forces. The type of woven fibers has a higher value compared to the type of continuous and discontinuous fibers. Discontinuous fiber type has a lower score than continuous fiber type. The fracture model of polyester composite with natural palm fibers showed the mechanism of brittle fracture (brittle) in all test specimens. However, in specimens with the type of continuous fibers and woven, the fracture conditions indicate a brush fracture mechanism.

Author Biographies

Kadek Rihendra Dantes, Universitas Pendidikan Ganesha

Mechanical Engineering Education, Technical and Vocational Faculty Undiksha.

Edi Elisa, Universitas Pendidikan Ganesha

Mechanical Engineering Education, Technical and Vocational Faculty Undiksha.

I Made Pasek Budi Susila, Universitas Pendidikan Ganesha

Mechanical Engineering Education, Technical and Vocational Faculty Undiksha.

References

A. Rahman, Moh. Farid, and H. Ardhyananta, “Pengaruh Komposisi Material Komposit dengan Matriks Polypropylene Berpenguat Serat Alam Terhadap Morfologi dan Kekuatan Sifat Fisik,” Teknik ITS, v. 5, n. 2, pp. 209–211, 2016.

D. A. S. Muhamad Muhajir, Muhammad Alfian Mizar, “Analisis Kekuatan Tarik Bahan Komposit Matriks Resin Berpenguat Serat Alam Dengan Berbagai Varian Tata Letak,” Jurnal Teknik Mesin, v. 24, n. 2, pp. 1–8, 2016.

U. B. Surono, “Analisa Sifat Fisis dan Mekanis Komposit Serat Ijuk Dengan Bahan Matrik Poliester”, 2017.

K. R. Dantes, “Analisis Kekuatan Impact Komposit Matrix Polyester Berpenguat Serat Rami dengan Perlakuan Alkali 0 %, 5 %, 10 %, dan 15 % NaOH untuk Bodi Kendaraan Ganesha Sakti”, Jurnal Pendidikan teknik Mesin UNDIKSHA, v. 6, n. 2, pp. 77–87, 2018.

M. A. Irfa’i, D. Wulandari, S. Sutriyono, dan E. Marsyahyo, “Pengaruh Fraksi Volume Serat Dan Lama Waktu Perendaman NaOH Terhadap Kekuatan Impak Komposit Poliester Berpenguat Serat Ijuk,” Rotasi, v. 18, n. 1, pp. 1, 2016, doi: 10.14710/rotasi.18.1.1-7.

A. E. Latief, N. D. Anggraeni, D. Hernady, “Karakterisasi Mekanik Komposit Matriks Polipropilena High Impact Dengan Serat Alam Acak Dengan Metode Hand Lay Up Untuk Komponen Automotive”, Rekayasa Hijau-Jurnal Teknologi Ramah Lingkungan, v. 3, n. 3, pp. 241–247, 2019.

G. Aprianto, I. N. P. Nugraha, dan K. R. Dantes, “Pengaruh Fraksi Volume Serat Terhadap Sifat Mekanis Komposit Matriks Polimer Polyester Diperkuat Serat Agave Sisal” Jurnal Pendidikan Teknik Mesin, v. 5, n. 2, 2016.

D. I. N. Aprilia, P. K. Nugraha, Dan R. Dantes, “Analisa Kekuatan Impact Dan Model Patahan Komposit Polyester-Serat Eceng Gondok Ditinjau dari Tipe Penyusunan Serat,” vol. 6, no. 1, pp. 58–66, 2018.

La Ode M. S. Q., Muksin, “Karakterisasi Kekuatan Mekanik Komposit Berpenguat Serat Ijuk Model Acak Bermatriks Epoksi”, Roda Gigi, v. 1, n. 1, pp. 1–9, 2017.

L. H. Carvalho, E. L. Canedo, S. R. Farias Neto, A. G. B. De Lima, and C. J. Silva, “Moisture Transport Process in Vegetable Fiber Composites: Theory and Analysis for Technological Applications,” Advanced Structured Materials, v. 36, pp. 37–62, 2013, doi: 10.1007/978-3-642-37469-2_2/COVER.

K. O. Supertama Yasa, I Nyoman Pasek Nugraha, Kadek Rihendra Dantes “Model Patahan Komposit Polyester Berpenguat Serat Kelapa ( Cocos Veridis )”, Jurnal Pendidikan Teknik Mesin , v. 6, n. 1, 2018.

I. P. G. Suartama, I. N. P. Nugraha, and K. R. Dantes, “Pengaruh Fraksi Volume Serat Terhadap Sifat Mekanis Komposit Matriks Polimer Polyester Diperkuat Serat Pelepah Gebang,” Jurnal Pendidikan Teknik Mesin Undiksha, v. 4, n. 1, 2016, doi: 10.23887/jjtm.v4i1.8312.

Downloads

Published

2023-08-15

How to Cite

Dantes, K. R., Elisa, E., & Susila, I. M. P. B. (2023). ANALISIS KEKUATAN IMPACT DAN MODEL PERPATAHAN KOMPOSIT POLYESTER BERPENGUAT SERAT ALAM IJUK. Jurnal Rekayasa Mesin, 14(2), 401–408. https://doi.org/10.21776/jrm.v14i2.1105

Issue

Section

Articles