ANALISIS SIMULASI PENGARUH VARIASI JARAK DAN MATERIAL SIRIP KONDENSOR AC SPLIT TERHADAP LAJU PERPINDAHAN PANAS
DOI:
https://doi.org/10.21776/ub.jrm.2022.013.01.30Keywords:
Computational Fluid Dynamic (CFD), Kondensor, Laju Perpindahan Panas, Solidworks 2018.Abstract
According to the functions and needs, in the future Air Conditioners must be able to have good performance as an air conditioning machine. Therefore, the Air Conditioner (AC) must be designed as well as possible to meet human needs which will increase in the future in terms of air conditioning, so it is necessary to analyze several parameters in designing, in order to maximize or improve the performance of each component of the cooling machine. This study aims to determine the effect of variations in distance and fin material of the AC Split condenser on the heat transfer rate using Computational Fluid Dynamic (CFD) simulation in Solidworks 2018 software. The fin distance variations that used are 0.5 mm, 1 mm (standard), and 1.5 mm. In addition, the fin material is also varied by using aluminum (standard), silver, and copper at each fin spacing. The type of research is experimental research, by using data analysis methods, called the finite element method. The results of the analyze that has been carried out, it shows that the smaller the distance between the fins, the higher the heat transfer rate, and the greater the thermal conductivity value of a material, the higher the heat transfer rate.
References
SUPRIYANTO, E., EFFENDY, M., “Simulasi distribusi temperatur ruangan ber ac pada berbagai variasi temperatur disekitar evaporator,†Comput. Fluids, p. 26, 2017.
SUARNADWIPA, N. “Pedoman Praktikum Refrigerasi,†Teknik Mesin, Fakultas Teknik, Universitas Udayana, Nov. 2016.
NAPITUPULU, F.H., FELLIX, SIHOMBING, H.V., “Design and analysis of heat exchanger (evaporator) type of staggered tube cross-flow as modified evaporator AC-Split,†J. Phys. Conf. Ser., vol. 1542, no. 1, 2020, doi: 10.1088/1742-6596/1542/1/012007.
AWWALUDDIN, M., “Analisa Perpindahan Kalor Pada Heat exchanger Pipa Ganda Dengan Sirip Berbnetuk Delta Wing,†Skripsi, Jurusan Teknik Mesin, Universitas Negeri Semarang, 2007.
BUDIMAN, A., SARI, S.P., “Pengaruh Pemilihan Jenis Material Terhadap Nilai Koefisien Perpindahan Panas Pada Perancangan Heat Exchanger Shell - Tube Dengan Solidworks,†In: Prosiding Seminar Nasional Tahunan Teknik Mesin XIV, v. 73, pp. 7–8, 2015.
ALKINDI, H., PURWANTO, Y., WULANDARI, D., “Analisis CFD Aliran Udara Panas Pada Pengering Tipe Rak Dengan Sumber Energi Gas Buang,†J. Keteknikan Pertan., vol. 3, no. 1, pp. 9–16, 2015.
WITJAKSONO, A. S., “Pemodelan Perpindahan Panas Pada Sirip Dalam (Internal Fin) Pada Pembangkit Uap Superheat,†p. 57, 2017, [Online]. Available: http://repository.its.ac.id/3306/.
IRAWAN, R., “Pengaruh Temperatur Tuang Terhadap Distribusi Serbuk Fly ASH Pada Komposit Al-Cu Diperkuat Serbuk Fly ASH,†Jurusan Teknik Mesin, Universitas Diponegoro, 2013.
GINTING, K.S., Efisiensi Dan Efektivitas Sirip Berpenampang Belah Ketupat Dengan Luas Penampang Fungsi Posisi Dan Konduktivitas Termal Bahan Fungsi Suhu Kasus Satu Dimensi Keadaan Tak Tunak, Skripsi, Jurusan Teknik Mesin, Universitas Sanata Dharma, 2018.
KURNIAWAN, P.H., “Material Teknik (Logam, Keramik, Polimer, dan Komposit),†Makassar, 2020.
ARSANA, I.M., “Pengaruh Jarak Antar Kawat Terhadap Efisiensi Penukar Panas Jenis Pembuluh Dan Kawat Konveksi Bebas,†J. Penelit. Saintek, vol. 21, no. 2, pp. 142–153, 2017.
ADAM, A.Y., OUMER, A.N., NAJAFI, G., ISHAK, M., FIRDAUS, M., AKLILU, T.B., State of the art on flow and heat transfer performance of compact fin-and-tube heat exchangers, vol. 139, no. 4. Springer International Publishing, 2020.
JAEDUN, A., “Metodelogi Penelitian Eksperimen,†Fakultan Teknik, UNY, 2011.
BASUKI, K., “Metodelogi Penelitian,†J. Online Int. Nas. Vol. 7 No.1, Januari – Juni 2019 Univ. 17 Agustus 1945 Jakarta, vol. 53, no. 9, pp. 1689–1699, 2019.
Downloads
Published
Issue
Section
License
Copyright (c) 2022 I Gede Wiratmaja, Edi - Elisa, Ardy Prasetya Vidiantara
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
