Analisis Pengaruh Letak Bahan terhadap Defleksi Balok Segi Empat dengan Tumpuan Engsel - Roll - Roll

Authors

  • Jahirwan Ut Jasron Mechanical Engineering Nusa Cendana University Kupang

DOI:

https://doi.org/10.21776/ub.jrm.2015.006.03.5

Keywords:

Deflection, Three Moment Methods, Load

Abstract

Deflection is one of criteria in designing a construction. Analysis can be conducted by using several method and to obtain the more accurate result the process can be conducted by using a computer program. For comparison to evaluate the accurate of the analysis, a deflection test was conducted with a deflection test device.The exact analysis was conducted by using the three moment methods. The aim of this study is to analyze the effect of the lay out of load along the beam towards deflection. The deflection along the beam varied according on the load and its position. The deflection obtained for brass is 1,29 x 10-3 m, while for alluminium and steel are 1,25 x 10-3 m and 4,87 x 10-4 m, respectively.

References

Timoshenko, 1950, Strength of Material, Elementary Theory and Problem, Part I, D Van Nostrand Company, Inc.Toronto,New York, London.

Meriam dan Kraige, 1991, Statika, Penerbit Erlangga, Jakarta.

Gere dan Timosenko, 1984, Mekanika Bahan, Jilid II, Terjemahan oleh Bambang Suryoatmono, 1996,Penerbit Erlangga, Jakarta.

William and Sturgess, 1983, Schaum’s Outline of Theory and Problems of Strength of Material, Second Edition, McGraw-Hill International Book Company, Singapore.

Timoshenko and Goodier, 1970, Theory of Elasticity, Third Edition, Terjemahan oleh Darwin Sebayang, 1994, Penerbit Erlangga, Jakarta.

Downloads

Published

2015-12-25

Issue

Vol. 6 No. 3 (2015)

Section

Articles

License